Grooved Wooden Slats, Wooden Grooved Acoustic Wall Panels. Acoustical Wall Panels by Ecotone™
Ecotone Systems manufacturer Our Wooden Acoustic Panel System utilizes aesthetically pleasing wood Grooved and perforated panels for acoustic treatment to wall and ceiling. Ecotone Wooden Acoustic Panels are high-performance acoustical products with an exceptional visual appearance. Acoustical wood panels come in a variety of configurations to meet all interior and acoustical requirements, provide balances sound reflection and absorption through groove and perforations. Acoustic insulation pads can be used to increase NRC values as per the Acoustic Consultant’s design
The Acoustic Panels System utilizes high-density MDF pre-laminated boards confirming to IS–14587: 1998, all joints of the wooden acoustic panel have dowel connection to avoid any sagging /unevenness. This ensures consistent quality for each panel on every project. The reverse side of each panel receives a layer of black acoustic fleeces and GI sheet ‘Z” clamps 25 / 50mm to create an air gap in between the wall and acoustic panels which can be filled with Polyester fiber / Glass wool pads if required as per acoustic designs.
TECHNICAL INFORMATION FOR WOODTRENDS® TOPLINE ACOUSTIC SYSTEM:
Size of Grooved Wooden Acoustic Panel: 575mm x 2420mm x 16mm thick
Size of Perforated Wooden Acoustic Panel: 600 x 600 mm, 600 x 1200mm, 12mm OR 16 mm thickness
Finish: Variety of pre-laminated board shades with a clear lacquer finish. Choose from Thansau maple, Mangfall Beech, Bavarian Beech, Natural Walnut, Raw Oak, Cappuccino Oak, Slate Wood, Siam wood, Siam Teak, Oxford Cherry (see attached veneer color chart)
Patterns: 14 / 2 , 14/3.2 , 28 / 2 , 28/3.2 mm
Ecotone Systems manufacturer Groove Wooden Slats have longitudinal grooves and slats, Grooved acoustic panel machined along the length of the panel. The base core board is a 16mm thick Fiberboard sheet with a finish laminated to its front face and black acoustic felt adhered to its rear face. These panels are consisting of a laminate finished surface, base core board and black acoustic felt attached on the back. The Ecotone groove acoustical Slats consist of panels made from acoustical fireboards with linear perforations for excellent uniformity. These panels can be placed with 50 mm thick acoustic insulation backing which will enhance the acoustic properties of the entire system. The groove wooden slats Materials based on acoustic theory, remarkable sound-absorbing function, middle and low-frequency sound-absorbing effects especially renowned.
0 Comments